Maintenance; Repair; Calibration - Newport DL225 User Manual

DL Stage Series
9.0

—Maintenance

EDH0391En1031 — 03/18
It is recommended to contact our After Sales Service who can assist you
with the appropriate maintenance for your application.
9.1 Maintenance
The DL stage requires no particular maintenance. Nevertheless, this is a
precision mechanical device that must be kept and operated in good
condition.
The DL stage must be used or stocked in a clean environment, without
dust, humidity, solvents or other substances.
It is recommended to return your DL stage to Newport's Service Team
after every 2000 hours of use for lubrication and cleaning.
If your stage is mounted on a workstation and cannot be easily
removed, please contact Newport's Service for further instructions.
9.2

Repair

Never attempt to disassemble a component of the stage that has not
been covered in this manual.
To disassemble a non specified component can cause a malfunction of
the stage.
If you observe a malfunction in your stage, please contact us immediately
to arrange for a repair.
Any attempt to disassemble or repair a stage without prior
authorization will void your warranty.
9.3

Calibration

It is recommended to return your DL stage to Newport once a year for
recalibration to its original specifications.
High-Performance Delay Line Stages
RECOMMENDATION
PRECAUTIONS
RECOMMENDATION
CAUTION
CAUTION
CAUTION
16