Table of Contents
Advertisement
Chapter 2
2.4.8
System Configure Screen
The system configure screen controls basic operation of the 6000 system. Brightness
varies the backlighting intensity. Contrast is used to optimize the viewing angle.
Lockout dial disables the dial to avoid accidental changes in active data fields when
the dial is bumped.
Lockout pad locks out the left and right arrow keys, the data entry portion on the
keypad. Navigation keys, such as up and down, MENU, MASTER, and FUNC
continue to work.
Note that both the Lockout dial and Lockout pad settings are temporarily suspended
while in the Configure System Screen, allowing the dial and keypad lockout settings
to be changed while in this screen..
Audible Beep controls the system's audible beeper. The beeper indicates errors,
invalid data entry, and other situations where the 6000 needs to alert the user. Each
press of the MASTER button will clear one error.
On Delay controls the delay time from the moment a Laser Diode Driver is turned on
by the user to the actual time the output is energized. The delay time is
programmable from 0 seconds to 30 seconds. The default setting is 3 seconds.
Key Rate - this controls the speed at which, when a key is held down, it repeats.
Settings are Slow, Medium, and Fast.
System Operation
→ → → →
Contrast=
Brightness= 100 %
Lockout dial=
Lockout pad=
→ → → →
Audible beep= Yes
On Delay=
Key Rate=
Dial Rate=
Figure 8 – System Configure Screen
11 %
No
No
3.0 S
Fast
Fast
17
Advertisement
Table of Contents
