User Code Change Event Displays; System Monitor Event Displays; Supervisory Event Displays; Service Request - Security Command XR20 User Manual

User Code Change Event Displays

This displays any addition, deletion, or change to a user code.
16-Character Display Description
12 ADD 19 1017 User 12 added user 19 on Oct. 17.
Press the right Select key for the time
this occurred.
32-Character Display Description
A DD 11: 41A 10 / 17 User 19 added by user 12 at 11:41
US:19 BY US:1 2
User Code Event Types - There are 3 event type you may see here:
ADD - User added DEL - User deleted
CHG - User code or authority level has been changed.

Supervisory Event Displays

This displays the date and time of an automatic test report.
16-Character Display Description
AUTO RECALL 1017 The test report was sent on Oct. 17.
32-Character Display Description
MSG 11: 58P 10 / 17 The test report was sent to the central
AUTO R ECALL station at the date and time shown.

System Monitor Event Displays

This displays any loss of the system's AC power or battery.
16-Character Display
POWER TBL 1017
32-Character Display
TBL 1: 05A 10 / 17
.
AM A C POW ER
System Monitor Event Types - There are 2 event types:
TBL - Trouble
System Monitor Event Names - There are 2 system monitors:
AC POWER

SERVICE REQUEST?

This feature of the User Menu allows you to just press any top row
SELECT key while SERVICE REQUEST? is displayed and have the
system automatically send a "Request for Service" message to the
central station. The display changes to REQUEST MADE
momentarily to confirm your request was sent.
Our service department will then contact you to arrange a service
appointment.
Note: This feature is not displayed if it has not been enabled on your
system.
Description
An AC failure occurred on the system.
Press the right Select key for the time.
Description
An AC failure occurred at 1:05
RST - Restore
BATTERY
User Menu
.
AM
23