Schedules - Security Command XR20 User Manual

Changing User codes
1. Access the User Menu.
2. Press the COMMAND key until USER CODES? displays.
3. Press any one of the SELECT keys. The keypad displays ADD
DEL CHG.
4. Press the SELECT key under CHG to change a user code. You
must have a Master user code level to change a user code.
5. At the USER NUMBER:
change and press COMMAND.
6. The display changes to CODE NO:
digit user code and press COMMAND. If the code you entered
is already in use, or is a code used internally by the system, the
keypad displays ALREADY IN USE. You must enter a different
4-digit user code.
7. If you are changing a code other than your own, the keypad next
displays MASTER? NO YES. Select YES if you want this user
to have a Master authority level.
Select NO if you want this user to have a Standard authority
level. If you select NO, refer to item number 7 in the Adding User
Codes section on the previous page.
Important: Changing a user code does not change the user
number. User number two may have their user code changed from
1234 to 5678 but they are still user number two.
User Menu
- prompt, enter the user number to
* * * *
. Enter the new 4-

Schedules

User Code Level: Master only.
Function: The Schedules function allows you to program into the
system the times at which you normally turn your burglary protection
on and off each day of the week. This information can then be used
by the system to automatically arm or disarm the burglary protection.
You can also use the Closing Check/Extend feature with Schedules
to help ensure your system is armed by an authorized user at a
specific time. This option sounds the keypad buzzer and displays
CLOSING TIME! when a schedule expires. Users still on the premises
are reminded to arm the system or extend the schedule to a later time.
If the system is not armed, or the schedule not extended, a report can
be sent to the central station and/or a pager.
Your system provides you with two different types of schedules:
Permanent schedules are used for automatic arming and disarming
and always occur at the same time until you change or delete them.
Extend schedules allow an authorized user to extend the present
day's permanent scheduled closing time.
Setting an Arming and Disarming Schedule
1. Access the User Menu.
2. Press the COMMAND key until SCHEDULES? displays. Press
any SELECT key. The keypad displays PRM EXT. Press the
SELECT key under PRM.
3. The keypad next displays the day of the week you want the
schedule to start as SUN MON TUE WED. Press the COMMAND
key to show the remaining days of the week and then press the
SELECT key under your choice.
19