User Codes - Security Command Executive XR200 User Manual

User Codes

User Code Level: 9 only.
Function: Allows you to add, delete, and change a user's (person
operating the system) user code or authority level.
There are three characteristics associated with each user code that
define its capabilities within the system.
125
User Number
User Number - Every user is numbered. This number identifies
them to the system and can be transmitted to the central station
when they arm or disarm areas.
User Code - Each user also has a 3 to 5 digit number they enter into
the Security Command keypad when arming or disarming the
system. NOTE: A User Code cannot begin or end with zero or be in
the range of 1 to 299.
User Names - Each code may also be programmed with the user's
name. Up to 16 characters may be entered.
Areas - Each user may be assigned specific areas in the burglary
alarm system.
User Level - The user is also assigned a level of authority (1 to 9)
or customized authority by the person administrating the system that
determines the functions the user can access.
Important: Each area must have at least one user with a level 9
authority in order to be able to add or delete user codes.
20
User Menu
User Codes
User Code Level: 9 only.
Function: Allows you to add, delete, and change a user's (person
operating the system) user code or authority level.
There are three characteristics associated with each user code that
define its capabilities within the system.
125
User Number
User Number - Every user is numbered. This number identifies
them to the system and can be transmitted to the central station
when they arm or disarm areas.
User Code - Each user also has a 3 to 5 digit number they enter into
the Security Command keypad when arming or disarming the
system. NOTE: A User Code cannot begin or end with zero or be
in the range of 1 to 299.
User Names - Each code may also be programmed with the user's
name. Up to 16 characters msy be entered.
Areas - Each user may be assigned specific areas in the burglary
alarm system.
User Level - The user is also assigned a level of authority (1 to 9)
or customized authority by the person administrating the system that
determines the functions the user can access.
Important: Each area must have at least one user with a level 9
authority in order to be able to add or delete user codes.
20 User Menu
34812 7
User Code User Level
34812 7
User Code User Level
The following table lists system functions users are allowed to
access based on the authority level assigned to their codes.
User Code Authority Levels
Menu Options 1 2
Sensor Reset
* *
Armed Areas
* *
Zone Status
* *
System Status
* *
Display Events
* *
Door Access
* *
Arm and Disarm
+
Alarm Silence
*
System Test
Zone Monitor
Outputs On/Off
Extend
Bypass Zones
Schedules
Set Time
User Codes
= These functions can only be accessed during certain schedules.
*
= Arming allowed anytime. Disarming allowed outside of a schedule
+
but an Unauthorized Entry report is sent to the central station.
The following table lists system functions users are allowed to
access based on the authority level assigned to their codes.
User Code Authority Levels
Menu Options 1 2
Sensor Reset
* *
Armed Areas
* *
Zone Status
* *
System Status
* *
Display Events
* *
Door Access
* *
Arm and Disarm
+
Alarm Silence
*
System Test
Zone Monitor
Outputs On/Off
Extend
Bypass Zones
Schedules
Set Time
User Codes
= These functions can only be accessed during certain schedules.
*
= Arming allowed anytime. Disarming allowed outside of a schedule
+
but an Unauthorized Entry report is sent to the central station.
3 4 5 6 7 8
3 4 5 6 7 8
9
9