User Codes - Security Command XR20 User Manual

Executive series command processor panels
Hide thumbs Also See for XR20:
Table of Contents

Advertisement

User Codes

User Code Level: Master only.
Function: Allows you to add or delete a user from the system or
change their user code or authority level.
There are three characteristics associated with each user code:
10
User Code
User number
User Number - Your system supports 32 users. Each user is
numbered from 1 to 32. This number identifies them to the system
and is transmitted to the central station (if your system is monitored)
when they arm or disarm the system.
User Code - Users also have a 4-digit user code they enter into the
keypad when arming or disarming. This user code is kept secret from
other users and is not transmitted to the central station when they arm
or disarm.
Users enter only their own user code when operating the system.
Authority Level - The user is also assigned a level of authority
(Master or Standard) by the person administrating the system that
determines the functions they can access.
The table to the right lists system functions users are allowed to
access based on the authority level assigned to their codes at the
time they are added to the system.
User Menu
3812
Master
Authority level
User Codes
(continued)
User Code Authority Levels
System Options
Sensor Reset
Outputs On/Off
Bypass Zones
Zone Monitor
System Test
Arm and Disarm
Display Events
Schedules
Date and Time
User Codes
Adding User codes:
1. Access the User Menu.
2. Press the COMMAND key until USER CODES? displays.
3. Press any SELECT key. The keypad displays ADD DEL CHG.
4. Press the SELECT key under ADD to add a new user code.
(You must have a Master user level to add a user to the system.)
5. At the USER NUMBER:
press COMMAND. The displays changes to CODE NO:
6. Enter a 4-digit user code and press COMMAND. This is the
number the user will use each time they arm, disarm, or make
changes to the system.
Note: If your system is using an access control reader, present the
new user's access device instead of entering a user code.
Standard
Master
- prompt, enter a user number and
.
17

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xrsuper6 security command executive series

Table of Contents