Specifying A Recipient By Touching A One-Touch Dial Button - Konica Minolta bizhub 362 User Manual

IP Relay operations

Specifying a recipient by touching a one-touch dial button

1
Position the document to be scanned.
2
Press the [Fax/Scan] key.
– The screen that appears after the
[Fax/Scan] key is pressed can be
specified using the "Default
Screen" parameter in the User's
Choice screen. For details, refer
to the User manual [Copy
Operations].
3
Touch [One-Touch].
4
Select the index containing the
desired recipient, and then touch the
one-touch dial button.
– Multiple recipients can be
specified for simultaneous
transmission with the same one-
touch dial button. A maximum of
300 recipients can be specified
with a single one-touch dial
button.
– To select an index, touch the tab of the desired index, or touch
– For details on changing the index names, refer to "Naming an
index" on page 3-37.
– If software switch settings were specified to prevent broadcast
transmissions, a fax cannot be sent to multiple recipients. For
details on the software switch settings, refer to "Specifying
software switch settings (machine functions)" on page 8-11.
5
Specify the appropriate settings on
the Quality & Reduction tab
according to the document to be
sent.
– For details, refer to "Specifying
the scanning quality and zoom
ratio" on page 6-15.
bizhub 362/282/222
or to select a different tab.
6
6-5