Specifying Additional Functions - Konica Minolta bizhub 362 User Manual

IP Relay operations
6.5

Specifying additional functions

Touch [Menu] in the screen that appears when the [Fax/Scan] key is pressed
to add the following functions.
Note
If the optional fax kit has been installed, [Menu] changes to [Fax Menu].
Function
Setting 1
*(Set 1)
Setting 2
*(Set 2)
* Changes to ( ) if the optional fax kit has been installed.
bizhub 362/282/222
Description
TSI Select the information, such as this machine's name, fax
number or address or the recipient's name, that is printed
at the edge of the page. For details on registering trans-
mission source information, refer to the User manual [Net-
work Scanner Operations]. If a recipient's name is
selected, the recipient name registered with the one-
touch dial button is printed.
TX Report Select the conditions for printing the transmission results
report.
Default: Select this setting to print the report according to
the setting specified from the Administrator Management
screen.
ON: Select this setting to print the report, regardless of the
transmission result.
If TX Fails: Select this setting to print the report only if the
transmission failed.
OFF: Select this setting to not print the report, regardless
of the transmission result.
2in1 Select whether or not to send the data using the "2in1"
function (reducing two pages to fit in a single page).
2-Sided TX Select whether or not a double-sided transmission is per-
formed. The position of the binding margin and the page
orientation can also be specified.
Rotation TX Select whether or not to rotate the scan image according
to the paper orientation of the receiving machine.
This function can be specified when sending an A4-size
image with a resolution of 200 dpi or less.
Priority TX Select whether or not the data is sent with priority over the
other jobs.
Timer TX Setting Specify the time that the fax is to be sent.
Stamp Specify whether the scanned image is stamped to indicat-
ed that it has been scanned. The document must be load-
ed into the ADF.
Note
In order to use the "Stamp" function, optional
stamp unit must be installed.
6
6-19