Konica Minolta bizhub 362 User Manual page 260

8
Specifying settings for the image in the results report (mode 023)
Specify whether or not an image of the transmitted document is added to the
results report
Settings at time of purchase
Bit
Setting
Specifying the setting
During the production of this unit, the settings in the shaded cells were
selected. The numbers on the right side indicate the page numbers with
descriptions for the corresponding function.
Bit
7, 6, 5, 4
3
2, 1, 0
8-16
7 6 5 4 3 2 1 0
1 1 1 1 1 0 0 0 (HEX: F8)
Description Setting
----------------------- 1111
Specifies whether or 0
not an image of the
1
transmitted docu-
ment is added to the
results report.
----------------------- 000
Specifying management settings
Description
*Do not change these bits
when specifying setting
for this function.
Is not added
Is added
*Do not change these bits
when specifying setting
for this function.
bizhub 362/282/222
Page Refer-
ence
----------
p. 3-20, p. 4-20,
p. 6-21
----------