Konica Minolta bizhub 362 User Manual page 275

Specifying management settings
Settings at time of purchase
Bit
Setting
Specifying the setting
During the production of this unit, the settings in the shaded cells were
selected. The numbers on the right side indicate the page numbers with
descriptions for the corresponding function.
Bit
7
6
5
4
3
2, 1, 0
*1
If bit 6 is set to "1", the settings will not be applied if bit 5 is set to "1" (not
displayed). If you do not wish to display the fax number or address of the
recipient, bit 6 must also be set to "1" (settings can only be specified in
Administrator mode).
*2
If the recipient is directly specified from the Direct Input tab, the recipient
is displayed, even if "1" (not displayed) is selected.
bizhub 362/282/222
7 6 5 4 3 2 1 0
0 0 0 0 0 0 0 0 (HEX: 00)
Description Setting
Specifies whether or 0
not the use of the
1
computer (scanner)
is prohibited.
Specifies whether 0
settings for register-
ing fax addresses or
1
printing reports can
be specified by only
the administrator or
also by the user.
Specifies whether or 0
not only recipient
1
names are displayed
(and the fax number
or address is not
displayed) in reports
and Job List screens
and when a one-
touch dial button is
* *
touched. 1, 2
----------------------- 0
Specifies whether or 0
not the use of TCP-
1
Socket is prohibited.
----------------------- 000
Description
Permitted
Prohibited
Settings can also be
specified by users.
Settings can only be
specified in Administrator
mode.
Displayed
Not displayed
*Do not change this bit
when specifying setting
for this function.
Permitted
Prohibited
*Do not change these bits
when specifying setting
for this function.
8
Page Refer-
ence
----------
----------
----------
----------
----------
----------
8-31