Specifying Additional Functions - Konica Minolta bizhub 362 User Manual

4
4.5

Specifying additional functions

Touch [Menu] in the screen that appears when the [Fax/Scan] key is pressed
to add the following functions.
Note
If the optional fax kit has been installed, [Menu] changes to [Fax Menu].
Function
Setting 1 tab
*(Set 1 tab)
Setting 2 tab
*(Set 2 tab)
Network
*(Net.)
* Changes to ( ) if the optional fax kit has been installed.
4-18
Description
TX Report Select the conditions for printing the transmis-
sion results report.
Default: Select this setting to print the report ac-
cording to the setting specified from the Admin-
istrator Management screen.
ON: Select this setting to print the report, re-
gardless of the transmission result.
If TX Fails: Select this setting to print the report
only if the transmission failed.
OFF: Select this setting to not print the report,
regardless of the transmission result.
2in1 Select whether or not to send the data using the
"2in1" function (reducing two pages to fit in a
single page).
2-Sided TX Select whether or not a double-sided transmis-
sion is performed. The position of the binding
margin and the page orientation can also be
specified.
Priority TX Select whether or not the data is sent with prior-
ity over the other jobs.
Timer TX Setting Specify the time that the fax is to be sent.
Stamp Specify whether the scanned image is stamped
to indicate that it has been scanned. The docu-
ment must be loaded into the ADF.
File Name The name of the saved data file can be speci-
fied. Up to 16 characters can be entered.
Scan to PC operations
Note
In order to use the "Stamp" function,
optional stamp unit must be installed.
bizhub 362/282/222