Konica Minolta bizhub 362 User Manual page 259

Specifying management settings
Specifying settings to limit dialing and broadcast transmissions
(mode 018)
Specify whether or not broadcast transmissions and dialing to specify
destinations are limited.
Settings at time of purchase
Bit
Setting
Specifying the setting
During the production of this unit, the settings in the shaded cells were
selected. The numbers on the right side indicate the page numbers with
descriptions for the corresponding function.
Bit
7, 6, 5, 4
3
2
1, 0
*1
Prohibited when bit 6 of software switch setting mode 477 is set so that
the settings can only be specified in Administrator mode
bizhub 362/282/222
7 6 5 4 3 2 1 0
0 0 0 0 0 0 0 1 (HEX: 01)
Description Setting
---------------------- 0000
Specifies whether or 0
not dialing to specify
1
a destination is pro-
hibited. *1
Specifies whether or 0
not broadcast trans-
1
missions are prohib-
ited.
---------------------- 01
Description
*Do not change these bits
when specifying setting
for this function.
Permitted
Prohibited
Permitted
Prohibited
*Do not change these bits
when specifying setting
for this function.
8
Page Refer-
ence
----------
----------
----------
----------
8-15