Konica Minolta bizhub 362 User Manual page 110

4
10
On the Scan Mode screen, settings
can be specified for the following.
Select the desired settings, and then
touch [Enter].
– File Type: Select either "TIFF" or
"PDF".
– Coding Method: Select the
coding method ("MH" or "MMR")
for the data to be sent. The data
amount with the MMR coding method is less than with the MH
method.
11
To change the port number, touch
[Port].
– To change the port number,
press the [C] (clear) key, use the
keypad to type in the port
number, and then touch [Enter].
– To return to the default setting,
touch [Default].
12
Touch [Next].
13
Check the information to be
registered, and then touch [Enter].
14
Touch [Enter] in each screen until the initial screen appears.
4-34
Scan to PC operations
bizhub 362/282/222