Specifying A Recipient With A One-Touch Dial Button; Selecting A One-Touch Dial Button; Specifying A Recipient By Touching A One-Touch Dial Button; Entering The Number Of The One-Touch Dial Button - Konica Minolta bizhub 200 User Manual

IP address faxing
2 IP address faxing
2.1

Specifying a recipient with a one-touch dial button

If the IP address of a recipient is registered with a one-touch dial button, data
can be sent simply by touching the one-touch dial button. In addition, other
transmission functions can be added or a mail program can be registered.
For details on registering a one-touch dial button or a mail program, refer to
"Adding a recipient" on page 2-31.

Selecting a one-touch dial button

A one-touch dial button can selected in any of the following ways. Use the
appropriate method according to the number of recipients and the desired
use.
- Directly touching the one-touch dial button

- Entering the number of the one-touch dial button

- Searching for the name of a recipient

Specifying a recipient by touching a one-touch dial button

1
Position the document to be scanned.
2
Press the [Fax/Scan] key.
– The screen that appears after the [Fax/Scan] key is pressed can be
specified using the "Default Screen" parameter in the User's
Choice screen. For details, refer to the User's Guide [Copy Opera-
tions].
3
Touch [One-Touch].
200/250/350
Fax/Scan
2
2-3