Konica Minolta bizhub 362 User Manual page 43

IP address faxing
9
To change the port number, touch
[Port].
– To change the port number,
press the [C] (clear) key, use the
keypad to type in the port
number, and then touch [Enter].
– To return to the default setting,
touch [Default].
10
Specify the appropriate settings on
the Quality & Reduction tab
according to the document to be
sent.
– For details, refer to "Specifying
the scanning quality and zoom
ratio" on page 3-12.
11
Specify the necessary settings on
the Menu tab.
– If the optional fax kit has been
installed, specify the necessary
settings on the FAX Menu tab.
– For details, refer to "Specifying
additional functions" on
page 3-16.
12
Press the [Start] key.
bizhub 362/282/222
3
3-11