Selecting Tones By Specifying The Group And Number - Roland RS-5 Owner's Manual

Playing the Sounds
Selecting Tones by Specifying the
Group and Number
Tones are separated into the following two groups. You can select Tones by
specifying the group and number.
User
128 Tones can be stored here. You can overwrite the Tones already stored
here, replacing them with Tones you create (p. 113).
Preset
This area holds 512 Tones; these cannot be overwritten or replaced.
However you may modify the settings of the currently selected tone, and
then store the modified tone in User memory.
1–256 are the RS-5/9's original Tones.
Tones 257–512 provide compliance with GM2.
fig.Q-19
1
Press [PERFORM/TONE] to display the Tone selection screen.
2
Press [TONE CATEGORY] to make the indicator goes out.
The following screen appears.
fig.Q-20exp
Tone selection screen
Tone Number
3
Press [USER/PRESET] to select the group (User or Preset).
26
Tone Name
Part Tone Number
Tone Group
1 3 2 4
Should "PERFORM" be
displayed, simply press
[PERFORM/TONE] once
more, and the Tone
selection screen is
displayed.
5