Using The Knobs To Change Patterns In Real Time - Roland RS-5 Owner's Manual

Chapter 5. Using the arpeggiator
Using the Knobs to Change
Patterns in Real Time
Using knobs C1– C4, you can change Patterns in real time.
1. Press the [ARPEGGOP ON/OFF] button, getting its
indicator to light.
Arpeggios can now be produced when chords are
played.
2. Press [ARPEGGIO/CONTROL] several times, getting its
indicator to start blinking.
* If the indicator lights, press [ARPEGGIO/CONTROL] again.
Using knobs C1– C4, you can change each of the
following parameter settings values in real time.
C1: Accent Rate (p. 77)
C2: Shuffle Rate (p. 77)
C3: Octave Range (p. 77)
C4: Tempo (p. 76)
When [ARPEGGIO ON/OFF] is set to ON, the
[ARPEGGIO/CONTROL] indicator switches each time
the button is pressed, cycling through lit, flashing, and
off.
When the indicator is off, you can change the LFO Rate,
LFO Depth, Envelope Attack, and Envelope Release in
real time (p. 74).
When the indicator is lit, you can change the parameter
you have set yourself in real time (p. 74).
78