Roland RS-5 Owner's Manual page 127

Connect the RS-5/9 to your computer using the method that is appropriate for your setup.
1. Before starting the connection procedure, make sure that the power to all devices has been turned off.
2. After reading "Connecting the RS-5/9 to external equipment" (p. 14), connect an audio device/system or headphones.
3. Connect the RS-5/9 and the computer as shown below.
4. As described in "Turning On the Power" (p. 15), turn on the power of each device.
fig.R11-06exp
Computer
Computer
Computer
Apple Macintosh series
USB Connector
of your Computer
USB Connector
of your Computer
USB Cable
USB Connector
of your Computer
USB Cable
PC
MIDI
Interface
MIDI OUT
Modem or
Printer Port
Chapter 11. Recording Performances on the RS-5/9 to an External Device
UM-1
UM-2
MIDI Cable
MIDI Cable
UM-4
MIDI Cable
MIDI Cable
MIDI IN
MIDI Cable
MIDI Cable
MIDI Interface Adapter
MIDI Cable
MIDI Cable
RS-5/9 Rear Panel
RS-5/9 Rear Panel
RS-5/9 Rear Panel
RS-5/9 Rear Panel
RS-5/9 Rear Panel
127