29: Distortion→Chorus; 30: Distortion→Flanger; 31: Distortion→Delay - Roland RS-5 Owner's Manual

Level (Output Level)
Adjust the output level.
Value: 0–127
29: DISTORTION→CHORUS
This effect connects distortion and chorus in series. The
parameters are essentially the same as "26: OVERDRIVE →
CHORUS," with the exception of the following two.
OD Drive → Dist Drive (Specify the amount of distortion.)
→ Dist Pan (Specify the stereo location of the
OD Pan
distortion sound.)
fig.MFX-29
L in
Balance D
Distortion Chorus
R in
Balance D
30: DISTORTION→FLANGER
This effect connects distortion and flanger in series. The
parameters are essentially the same as in "27: OVERDRIVE
→ FLANGER," with the exception of the following two.
OD Drive → Dist Drive (Specify the amount of distortion.)
→ Dist Pan (Specify the stereo location of the
OD Pan
distortion sound.)
fig.MFX-30
L in
Distortion
R in
L out
Balance W
Balance W
R out
Balance D
L out
Feedback
Balance W
Flanger
Balance W
R out
Balance D
Chapter 6. Effect Settings
31: DISTORTION→DELAY
This effect connects distortion and delay in series. The
parameters are essentially the same as in "28: OVERDRIVE
→ DELAY," with the exception of the following two.
OD Drive → Dist Drive (Specify the amount of distortion.)
→ Dist Pan (Specify the stereo location of the
OD Pan
distortion sound.)
fig.MFX-31
L in
Distortion
R in
L out
Balance D
Balance W
Delay
Balance W
Feedback
R out
Balance D
101