Roland RS-5 Owner's Manual page 180

Installing the Music Stand (RS-9 Only)
A music stand is provided with the RS-9. The following describes how to
attach and remove the stand.
1
Using the supplied screws, fasten the music stand to the back
of the RS-9 as shown at left.
Turn the screws clockwise to tighten them.
2
To remove the music stand, support it with one hand while
loosening the screws.
* When attaching the music stand, support it firmly with one hand to make sure that
you do not drop it. Be careful, so you do not get your fingers pinched.
* Do not apply excessive force to the front or back of the installed music stand.
* Should you remove the screws used for attaching the music stand, make sure to put
them in a safe place out of children's reach, so there is no chance of them being
swallowed accidentally.
02340601 '02-3-AE2-51N