Midi Implementation - Roland RS-5 Owner's Manual

MIDI Implementation

Model: RS-5/9 (64-voice synthesizer (conforms to General MIDI 2 System))
Date: Oct. 13, 2000
Version: 1.00
1. Receive data
Channel Voice Messages
* Not received when the Part parameter Rx Channel is set to OFF.
Note off
Status 2nd byte
8nH kkH
9nH kkH
n = MIDI channel number: 0H - FH (ch.1 - ch.16)
kk = note number: 00H - 7CH (0 - 124)
vv = note off velocity: 00H - 7FH (0 - 127)
* The velocity values of Note Off messages are ignored.
Note on
Status 2nd byte
9nH kkH
n = MIDI channel number: 0H - FH (ch.1 - ch.16)
kk = note number: 00H - 7CH (0 - 124)
vv = note on velocity: 01H - 7FH (1 - 127)
Control Change
Bank Select (Controller number 0, 32)
Status 2nd byte
BnH 00H
BnH 20H
n = MIDI channel number: 0H - FH (ch.1 - ch.16)
mm, ll = Bank number: 00H 00H - 7FH 7FH (bank.1 - bank.16384)
* Bank Select is not received when "GM1 System On" is received. If "GM System Off" is
received, then reception of Bank Select is enabled.
* Bank Select processing will be suspended until a Program Change message is received.
* The Tones and Drum Sets corresponding to each Bank Select are as follows.
Tone
+—————————————————————————————————————————————————————————————————————————+
| BANK SELECT BANK SELECT PROGRAM
| MSB LSB NUMBER
|=========================================================================|
| 000 - 032 000 001 - 128
| 064 000 001 - 128
| 065 000 001 - 128
| 066 000 001 - 128
| 121 000 - 009 001 - 128
+—————————————————————————————————————————————————————————————————————————+
Drum Set
+—————————————————————————————————————————————————————————————————————————+
| BANK SELECT BANK SELECT PROGRAM
| MSB LSB NUMBER
|=========================================================================|
| 000 000 001 - 057
| 064 000 001 - 002
| 065 000 001 - 011
| 120 000 001 - 057
+—————————————————————————————————————————————————————————————————————————+
Modulation (Controller number 1)
Status 2nd byte
BnH 01H
n = MIDI channel number: 0H - FH (ch.1 - ch.16)
vv = Modulation depth: 00H - 7FH (0 - 127)
Portamento Time (Controller number 5)
Status 2nd byte
BnH 05H
n = MIDI channel number: 0H - FH (ch.1 - ch.16)
vv = Portamento Time: 00H - 7FH (0 - 127)
* This adjusts the rate of pitch change when Portamento is ON or when using the
Portamento Control.When Portamento Time is 0, portamento will be OFF.
* Portamento Time, a Part parameter, is modified.
156
3rd byte
vvH
00H
3rd byte
vvH
3rd byte
mmH
llH
TONE TONE
GROUP NUMBER
Preset(GM) 257 - 512 |
User 001 - 128 |
Preset 001 - 128 |
Preset 129 - 256 |
Preset(GM) 257 - 512 |
DRUMSET DRUMSET
GROUP NUMBER
Preset(GM) 012 - 020 |
User 001 - 002 |
Preset 001 - 011 |
Preset(GM) 012 - 020 |
3rd byte
vvH
3rd byte
vvH
Data Entry (Controller number 6, 38)
Status 2nd byte
BnH 06H
BnH 26H
n = MIDI channel number:
mm, ll = the value of the parameter specified by RPN/NRPN
mm = MSB, ll = LSB
Volume (Controller number 7)
Status 2nd byte
BnH 07H
n = MIDI channel number:
vv = Volume:
* Volume messages are used to adjust the volume balance of each Part.
* Level, a Part parameter, is modified.
Pan (Controller number 10)
Status 2nd byte
BnH 0AH
n = MIDI channel number:
vv = pan:
* Pan, a Part parameter, is modified.
* For Drum Parts, this is a relative adjustment of each Instrument's pan setting.
Expression (Controller number 11)
Status 2nd byte
BnH 0BH
n = MIDI channel number:
vv = Expression:
* It can be used independently from Volume messages. Expression messages are used for
musical expression within a performance; e.g., expression pedal movements, crescendo
and decrescendo.
Effect Control 1 (Controller number 12)
Status 2nd byte
BnH 0CH
n = MIDI channel number:
vv = Control value:
Effect Control 2 (Controller number 13)
Status 2nd byte
BnH 0DH
|
n = MIDI channel number:
|
vv = Control value:
Hold 1 (Controller number 64)
Status 2nd byte
BnH 40H
n = MIDI channel number:
vv = Control value:
|
|
Portamento (Controller number 65)
Status 2nd byte
BnH 41H
n = MIDI channel number:
vv = Control value:
* Portamento Switch, a Part parameter, is modified.
Sostenuto (Controller number 66)
Status 2nd byte
BnH 42H
n = MIDI channel number:
vv = Control value:
Soft (Controller number 67)
Status 2nd byte
BnH 43H
n = MIDI channel number:
vv = Control value:
3rd byte
mmH
llH
0H - FH (ch.1 - ch.16)
3rd byte
vvH
0H - FH (ch.1 - ch.16)
00H - 7FH (0 - 127)
3rd byte
vvH
0H - FH (ch.1 - ch.16)
00H - 40H - 7FH (Left - Center - Right)
3rd byte
vvH
0H - FH (ch.1 - ch.16)
00H - 7FH (0 - 127)
3rd byte
vvH
0H - FH (ch.1 - ch.16)
00H - 7FH (0 - 127)
3rd byte
vvH
0H - FH (ch.1 - ch.16)
00H - 7FH (0 - 127)
3rd byte
vvH
0H - FH (ch.1 - ch.16)
00H - 7FH (0 - 127) 0-63 = OFF, 64-127 = ON
3rd byte
vvH
0H - FH (ch.1 - ch.16)
00H - 7FH (0 - 127) 0-63 = OFF, 64-127 = ON
3rd byte
vvH
0H - FH (ch.1 - ch.16)
00H - 7FH (0 - 127) 0-63 = OFF, 64-127 = ON
3rd byte
vvH
0H - FH (ch.1 - ch.16)
00H - 7FH (0 - 127) 0-63 = OFF, 64-127 = ON