fig.Q-42
1
Press [EDIT], getting the indicator to light.
2
Use VALUE [-]/[+] to select "Tone/Drum/PFMCommon."
3
Press [ENTER].
4
Press [9] a number of times to select "Split Point."
fig.Q-43
5
Press VALUE [-]/[+] to select the value (C-1–G9).
6
Press [EDIT].
The [EDIT] indicator goes out, and you are returned to the previous screen.
A quick way to change the Split Point
If you hold down [SPLIT] and press [EDIT], you can select the "Split Point"
screen directly. Make settings as explained in steps 5–6 of the above
procedure.
Also, if you want be able to change the split point quickly, by holding down
[SPLIT] and pressing VALUE [-]/[+], you can change only the "Split Point"
setting. When you release [SPLIT], the previous display will reappear.
Playing Two Tones on the Keyboard
2,5
4
1,6
3
If you hold down [SHIFT]
and press [9], you will
return to the previous item.
41