Changing The Sound's Pitch In Real Time (Pitch Bend Lever) - Roland RS-5 Owner's Manual

Using the Convenient Functions in Performances
Changing the Sound's Pitch in Real
Time (Pitch Bend Lever)
The "height" of a sound is called "pitch."
While playing the keyboard, move the lever to the left to lower the pitch, or
to the right to raise the pitch.
When shipped from the factory, this is set so that the pitch is changed up or
down one whole step.
fig.Q-58exp
Pitch Bend
You can set up to a two-octave pitch bend range, adjustable in half-steps.
fig.Q-59
1
Press [EDIT], getting the indicator to light.
2
Use VALUE [-]/[+] to select "Performance Part."
3
Press [ENTER].
4
Press PART [
bend is to be changed.
5
Press [5] a number of times to select "Pitch Bend Range."
fig.Q-60
50
]/[ ] to select the Part for which the pitch
2,6 4
Pitch Bend is not applied to
arpeggios.
The pitch bend range
settings can be made for
each individual Part in a
Performance (p. 56).
5 1,7 3
When Key Mode (p. 34) is
set to Split or Dual, you can
select only two Parts, the
Upper Part and the Lower
Part.
If you hold down [SHIFT]
and press [5], you will
return to the previous item.