Easy Tone Selection (Switching Parts) - Roland RS-5 Owner's Manual

Playing the Sounds

Easy Tone Selection (Switching Parts)

By switching Parts, you can select Tones easily.
The RS-5/9 has 16 Parts. Parts are the equivalent of performers playing
instruments, and you can assign a different Tone to each individual Part.
• Selecting Tones By Category (TONE CATEGORY)
• Selecting Tones by Specifying the Group and Number
The two methods of selecting Tones shown above are used to change Tones
while a single Part is selected.
Here, let's select a Tone easily by switching Parts.
fig.Q-21
1
Press PART [
fig.Q-22
When you want to perform in ensemble using multiple parts
• "Recording to an External Sequencer" (p. 124)
• "Enjoying Computer Music" (p. 126)
When you want to know how to switch Parts with Key Mode set to Split
or Dual
• "Changing the Two Parts Being Used" (p. 39)
28
]/[ ] and select one of the Parts 1–16.
1
By selecting a Tone (p. 23,
26) or Drum Set (p. 29, 30)
after selecting a Part, you
can then switch the Tone or
Drum Set for that Part.