Roland RS-5 Owner's Manual page 12

Front and Rear Panel
G
G
MIDI Connectors
External MIDI devices can be connected here (p. 120, 122,
124, 127). Use MIDI cables (sold separately) to make
connections.
IN:
MIDI messages from an external device are received at
this connector.
OUT:
MIDI messages are transmitted from this connector to an
external device.
THRU:
MIDI messages received at MIDI IN are re-transmitted
without change from this connector to an external MIDI
device.
H
PEDAL Jack
CONTROL:
Accepts connection of an external pedal, such as an
expression pedal (the optional EV-5), pedal switch (the
optional DP-2/6), or foot switch (the optional BOSS FS-
5U) (p. 14).
HOLD:
Allows you to use a connected pedal switch (the optional
DP-2/6) or foot switch (the optional BOSS FS-5U) as a
hold pedal (p. 14).
I
OUTPUT Jacks
Connect your amp or mixer to these jacks (p. 14). These jacks
output the audio signal in stereo. For mono output, use the L
jack.
12
H I J
J
PHONES Jack
Accepts connection of headphones (p. 14).
K
Cord Hook
To prevent the inadvertent disruption of power to your unit
(should the plug be pulled out accidentally), and to avoid
applying undue stress to the AC adaptor jack, anchor the
power cord using the cord hook, as shown in the illustration.
L
AC Adaptor Jack
Connect the included AC adaptor here (p. 14).
M
POWER Switch
Turns the power on/off (p. 15).
K L M