Roland RS-5 Owner's Manual page 146

Parameter List
36: FLANGER→DELAY (p. 104)
Parameter Name Full Name of Parameter
Flg Pre Delay Flanger Pre Delay Time
Flg Rate Flanger Rate
Flg Depth Flanger Depth
Flg Feedback Flanger Feedback Level
Flg Balance Flanger Balance
Delay Time Delay Time
Delay Feedback Delay Feedback Level
Delay HF Damp Delay HF Damp
Delay Bal Delay Balance
Level Output Level
37: CHORUS→FLANGER (p. 104)
Parameter Name Full Name of Parameter
Chorus Delay Chorus Pre Delay Time
Chorus Rate Chorus Rate
Chorus Depth Chorus Depth
Chorus Bal Chorus Balance
Flg Pre Delay Flanger Pre Delay Time
Flg Rate Flanger Rate
Flg Depth Flanger Depth
Flg Feedback Flanger Feedback Level
Flg Balance Flanger Balance
Level Output Level
38: CHORUS/DELAY (p. 105)
The parameters are the same as for "35: CHORUS → DELAY."
However, the Delay Balance parameter adjusts the volume
balance between the direct sound and the delay sound.
39: FLANGER/DELAY (p. 105)
The parameters are the same as for "36: FLANGER → DELAY."
However, the Delay Balance parameter adjusts the volume bal-
ance between the direct sound and the delay sound.
40: CHORUS/FLANGER (p. 105)
The parameters are the same as for "37: CHORUS → FLANGER."
However, the Flanger Balance parameter adjusts the volume bal-
ance between the direct sound and the flanger sound.
41: LOFI (p. 106)
Parameter Name Full Name of Parameter
Bit Down Bit Down
S-Rate Down Sample-Rate Down
Post Gain Post Gain
Low Gain Low Gain
High Gain High Gain
Output Output
Level Output Level
146
42: SLICER (p. 106)
Value Parameter Name Full Name of Parameter
0.0–100 [ms] Timing Pttern
0.05–10.00 [Hz] Accent Pttern
0–127 Accent Level
-98– +98 [%] Attack
D100:0W–D0:100W Rate
0.0–500 [ms]
Reset
-98– +98 [%]
Level
200–8000 [Hz], BY-
PASS
D100:0W–D0:100W
0–127
Value
0.0–100 [ms]
0.05–10.00 [Hz]
0–127
D100:0W–D0:100W
0.0–100 [ms]
0.05–10.00 [Hz]
0–127
-98– +98 [%]
D100:0W–D0:100W
0–127
Value
0–7
32, 16, 8, 4 [kHz]
0, +6, +12, +18 [dB]
-15– +15 [dB]
-15– +15 [dB]
MONO, STEREO
0–127
Timing Pattern
Accent Pattern
Accent Level
Attack
Rate
Reset
Output Level
Value
1–34
1–16
0–127
1–10
0.05–10.00 [Hz],
note-value symbols
OFF, ON
0–127