Key Mode - Roland RS-5 Owner's Manual

C D E
C
PHRASE PREVIEW Button
Press this button to check the sound of a Tone or Drum Set
before selecting (p. 33).
UTILITY Button
Used when saving data (p. 113), transmitting GM or GM2 Setup
messages (p. 129), and restoring previous settings (p. 117).
PART /
Switches the Parts (p. 28).
VALUE -/+ Button
This is used to modify values. When one of these buttons is
first held down and the other is pressed, the value then
changes rapidly while [SHIFT] is held down (p. 64).
D

KEY MODE

SPLIT Button
Sets Key Mode to Split. When pressed, the keyboard is split
into two separate ranges, with a different Tone played in
each (p. 34).
DUAL Button
Sets Key Mode to Dual. When pressed, two different Tones
are layered together (p. 36).
F
Button
Front and Rear Panel
ARPEGGIO ON/OFF Button
This button turns the arpeggio on or off (p. 75).
EFFECTS ON/OFF Button
Switches the multi-effects, reverb, and chorus effects on and
off (p. 79).
TRANSPOSE ON/OFF Button
Transposes all Parts (p. 48).
SHIFT Button
This button is used in conjunction with other buttons (p. 64,
65).
E
TONE CATEGOTY Button
Selects Tones when the Tone Search function is used (p. 23).
PERFORM/TONE Button
This button switches between the Tone Select display and the
Performance Select display (p. 23, 29, 57).
USER/PRESET Button
This button switches between User Tones (or Drum Sets or
Performances) and Preset Tones (or Drum Sets or
Performances) (p. 26, 30, 57).
F
Numeric Keys 1–0
Used for inputting numbers when selecting and saving
Tones and Performances (p. 27, 30, 57). When selecting Tones
by category, these specify the category (p. 23). When the
EDIT button is pressed, the functions printed beneath the
buttons can be selected.
EDIT Button
Press this button when you wish to adjust various settings.
ENTER Button
Use this button to finalize a value or execute an operation.
11