Table of Contents
Advertisement
You can log incoming FTP connections in to the FTP log
by enabling
FTP Logging
stored in %WinDir%\System32\LogFilesMSFTPSVC1.
Administrators can access these files from their
workstation by either accessing an administrative
share (for example,
\\appliancename\C$\winnt\system32\logfiles\msftp
svc1) or by creating a new share for this folder.
To enable FTP Logging
1. On the primary menu bar, select
2. On the secondary menu bar, select
—OR—
Select the
Selection
FTP Service Properties
The
displays.
Figure 29 FTP Service Properties
3. Select the
4. Check the
OK
.
Allowing anonymous access to the FTP server enables
users to connect with the user name anonymous (or
ftp, which is a synonym for anonymous). A password
is not necessary, but the user is prompted to supply
DataSafe NAS User's Manual
FTP Logging
. By default, FTP logs are
FTP Service
option from the
Properties
table, then click
Logging
tab.
Enable logging
check box, then click
FTP Anonymous Access
Services
.
FTP
.
Object
.
page (Figure 29)
79
Advertisement
Chapters
Table of Contents
