Identification; Network Setup - Iomega DataSafe Network Device User Manual

2 Network Setup

From the Network Setup
which network-related properties of the DataSafe NAS
to configure:

Identification

n
membership of the DataSafe NAS. (See
"Identification" on page 17.)
Interfaces
n
on the DataSafe NAS. (See "Interfaces: Network
Settings" on page 26.)
Global Settings
n
that apply to all network adapters on the DataSafe
NAS. (See "Global Settings: Network
Configuration" on page 34.)
Change Administrator Password
n
your password, or change the password of a user
who is also a member of the Administrators group
account. (See "Change Administrator Password"
on page 41.)
Note:
The second component of this task applies to
the user currently accessing the DataSafe
NAS, not to members of the "Administrator"
account.
SNMP Service Configuration
n
properties of the SNMP service on the DataSafe
NAS. This topic is covered in the Manage Services
chapter. (See "SNMP Service Configuration" on
page 90.)
NIC Configuration
n
of the NIC on the DataSafe NAS. (See "NIC
Configuration" on page 43.)
DataSafe NAS User's Manual
page, you can choose
—Set the name and domain
—Configure the local network settings
—Configure network settings
—Configure the properties
—Change
—Configure the
16