Iomega DataSafe Network Device User Manual page 29

To set or change the workgroup membership
of the DataSafe NAS
1. On the primary menu bar, click
2. On the Network Setup page, click
The Server Appliance Identity page (Figure 5) dis-
plays.
Figure 5 Server Appliance Identity
3. Select the
the name of the workgroup to join.
4. If the DataSafe NAS belonged to a domain before
you joined the workgroup, the DataSafe NAS will
be disjoined from the domain and the computer
account will be disabled.
5. Click OK
6. You will be asked to reboot the DataSafe NAS. You
may accept the reboot, or cancel it.
If you click
n
a page will appear indicating that the unit is
restarting. After the DataSafe NAS is back online,
you must reinitiate your browser, then return to
DataSafe NAS User's Manual
Workgroup
radio button and enter
.
OK , the DataSafe NAS will reboot and
Network Setup .
Identification
.
24