Http Share Properties - Iomega DataSafe Network Device User Manual

3. From the
page 115), select the share for which you want to
add an FTP client.
4. Select the
5. Check the
6. Click OK
Related Topics
"Logs" on page 136
n
Use this page to specify which HTTP clients are
granted access to each share. Access can be granted
or denied on the basis of client host name. Access can
also be granted or denied on the basis of client
groups, where a client group contains one or more
client host names.
To allow clients permission to an HTTP share
1. On the primary menu bar, select
Shares.
2. On the secondary menu bar, select
3. From the
page 115), select the share for which you want to
add an HTTP client.
4. Select the
5. On the HTTP
Check the
n
Check the
n
You may choose to allow read-only, write-only, or
read/write permissions.
OK
6. Click
DataSafe NAS User's Manual
Object Selection table (Figure 49 on
FTP
tab.
Log visits
check box.
.

HTTP Share Properties

Object Selection
table (Figure 49 on
HTTP tab.
tab
Read check box to allow read access.
Write
check box to allow write access.
.
Folders and
Shares
.
124