Adding A Windows Or Unix Share - Iomega DataSafe Network Device User Manual

configure the properties of a given share, click the
radio button next to the name of the share you
want to modify.
Shared Path
n
path.
Type
— This column indicates the share type:
n
W = Windows (CIFS)
U = UNIX (NFS)
F = FTP
H = HTTP (WebDAV)
Description
n
description of the share, if one has been provided.
Object Selection
Use the
then click the task you want to perform from the Tasks
list (located next to the
Section Topics
"Adding a Windows or UNIX Share" on page 114
n
"Removing a Windows or UNIX Share" on page 116
n
"Modifying Windows or UNIX Share Properties" on
n
page 118

Adding a Windows or UNIX Share

To create a share, you must supply a share name that
is unique across all shares, the share path (that is, the
directory on the DataSafe NAS to be shared). Some
protocols also support the inclusion of a comment or
brief description of the share. Additionally, you must
enable at least one of the available protocols.
While a single user interface is provided to create a
share for all protocols, in actuality, a separate share is
created for each protocol. You can remove a share for
one protocol without removing the share for the
DataSafe NAS User's Manual
— This column displays the share
— This column displays a brief
table to select a share,
Object Selection table).
114