Iomega DataSafe Network Device User Manual page 50

Adapter:
n
Priority:
n
in a team (if you have specified a priority). You can
specify that an adapter serve as the Primary or
Secondary adapter within the Adapter Fault
Tolerance function of a team.
The Status column lists the following states:
Active
: The currently active adapter(s) in a team.
n
Adapters in FEC or GEC mode display this status to
show they are always active.
Standby
n
Disabled
n
defective, or the driver has failed to load.
Figure 13 Adapters in a team
Team Information
The
details:
IP Address
n
Team Type
n
highlighted in the Adapters in a Team status box.
DataSafe NAS User's Manual
Lists each adapter by name.
Lists the priority status for the adapters
: The current standby adapter In a team.
: The adapter has been removed or is
section lists the following
: Lists the IP Address for the adapter.
: Lists the team type for the adapter
45