Breaking And Restoring Team Configuration - Iomega DataSafe Network Device User Manual

Note: When you add a new team or if you delete a
team from the Network Control Panel, the
frame type for each adapter in the team
reverts to Auto. This is important only if you
need to manually set the frame type on your
adapters.
Breaking and Restoring Team
Configuration
CAUTION:
To break team configuration
1. On the primary menu bar, click
2. On the Network Setup page, click
Configuration
3. Follow the prompts and re-enter your password.
The Adapters in a team window displays (see Fig-
ure 13 on page 45).
4. Select the Team adapter in the component tree.
5. From the
command.
6. Click OK
To restore team configuration
1. On the primary menu bar, click
2. On the Network Setup page, click
Configuration
3. Follow the prompts and reenter your password.
DataSafe NAS User's Manual
To allow two different subnets to
access the DataSafe NAS, you must
break team configuration. In this case
the NIC failover feature will not be
provided.
.
Action menu, select the
to commit the new configuration.
.
Network Setup
.
NIC
Remove
Network Setup .
NIC
46