Cifs Share Properties - Iomega DataSafe Network Device User Manual

General
The
(Figure 51) opens.
5. Change values as needed, including the name,
path, and description of the share, and the type(s)
of client from which the share is accessible.
6. Click the protocol tabs to open a page for
configuring the specific properties of each type of
share.
Before you can open any protocol tab, you must
check the box next to the corresponding option
under Accessible from the following clients
For more information see the following topics:
"CIFS Share Properties" on page 119
¨
"NFS Share Properties" on page 121
¨
"FTP Share Properties" on page 122
¨
"HTTP Share Properties" on page 124
¨
7. Click OK
The Common Internet File System (CIFS) is the
protocol used by Windows clients. Use this page to
change the number of users who have access to a
share, change the caching options relative to the
share, and set or change user permissions.
Appliance settings
In the User Limit
the maximum number of users, or you may specify the
number of connections which can be made at a given
time.
To set the user limit
Maximum allowed
Click the
n
allow as many people to log on to the DataSafe
NAS as it can handle.
DataSafe NAS User's Manual
Share Properties
tab of the
.

CIFS Share Properties

section, you may choose to allow
dialog
.
radio button to
119