Nfs Share Properties - Iomega DataSafe Network Device User Manual

6. Click OK
Use this page to specify which NFS clients are granted
access to each share. Access can be granted or denied
on the basis of client host name. Access can also be
granted or denied on the basis of client groups, where
a client group contains one or more client host names.
To add a new NFS client or client group to a
share
1. Create a new client group as described in "Adding
NFS Client Groups" on page 64.
2. Follow the steps described in the following
procedure to add an existing client or client group.
To add an existing client or client group
1. On the primary menu bar, select
Shares.
2. On the secondary menu bar, select
and UNIX Shares.
3. From the
page 115), select the share for which you want to
add an NFS client or client group.
4. In the Tasks
General
5. On the
Share name
the
Accessible from the following clients:
prompt, check the
6. Select the
7. Select the desired machine or group from the list
on the left, or type an NFS Client appliance name
in the text box on the right, then click
DataSafe NAS User's Manual
to save the changes.

NFS Share Properties

Object Selection table (Figure 49 on
list, click Properties
tab (Figure 51 on page 118), enter
Share path
, and
Unix (NFS)
NFS
tab.
Folders and
Windows
....
. Under the
box.
Add .
121