Iomega DataSafe Network Device User Manual page 140

To back up or restore the DataSafe NAS
partition
1. On the primary menu bar, select
Maintenance
2. On the
Backup/Restore
Services Client (TSC).
The Backup
Figure 57 Backup window
3. Select a wizard and follow the steps.
4. When you are finished, close the application and
log out of TSC.
Note: It may take a few moments for the Terminal
Services session to log off when closing the
application.
Terminal Services Client
TSC is the tool used to back-up and restore the
DataSafe NAS partition. TSC supports only two
concurrent connections. Additionally, if you navigate
DataSafe NAS User's Manual
Maintenance
page, select
, then log in to the Terminal
window (Figure 57) opens.
.
System
135