Iomega DataSafe Network Device User Manual page 128

2. On the secondary menu bar, select
and UNIX Shares.
3. From the
page 115), select the share for which you want to
add an FTP client.
Properties
4. Select
5. From the Public Share Properties
a check in the
bottom of the screen.
6. You will be returned to the
screen.
Properties
7. Select
Public Share Properties
8. On the
FTP
tab.
9. Specify permissions. You may choose to allow
read-only, write-only, or read/write permissions.
Check the
Check the
OK
10. Click
11. Select the
12. On the FTP
Check the
n
Check the
n
You may choose to allow read-only, write-only, or
read/write permissions.
13. Click OK
To log client visits to an FTP share
1. On the primary menu bar, select
Shares.
2. On the secondary menu bar, select
DataSafe NAS User's Manual
Object Selection table (Figure 49 on
Tasks
in the
FTP box, then click
Shared Folders
Tasks
in the
Read
check box to allow read access.
Write check box to allow write access.
.
FTP
tab.
tab
Read
check box to allow read access.
Write
check box to allow write access.
.
Windows
column.
screen, place
OK , at the
column.
page, click the
Folders and
Shares .
123