Enable Services
Microsoft recommends that you enable only the
necessary network components. Limiting the number
of enabled network components will enhance the
performance of other network services. Additionally, if
a problem is encountered with a network or dial-up
connection, the system will attempt to establish
connectivity by using every network protocol that is
installed and enabled. By only enabling the services
that your system can use, the DataSafe NAS can
conserve resources and perform better.
To enable a network service
1. On the primary menu bar, click
Manage Services
The
Figure 19 Manage Services
2. On the
Object Selection
to enable.
Tasks
3. On the
Selection
DataSafe NAS User's Manual
Services
page (Figure 19) displays.
table, select the service
list (adjacent to the
table), click
Enable
.
.
Object
60