Ftp Share Properties - Iomega DataSafe Network Device User Manual

8. Use the Type of access
indicate the degree of control the specified client
can exercise over files in the share.
OK
9. Click
To remove an NFS client
1. On the primary menu bar, select
Shares.
2. On the secondary menu bar, select
and UNIX Shares.
3. From the
page 118), select the share for which you want to
add an NFS client or client group.
4. In the Tasks
5. On the General
Share name
the
Accessible from the following clients:
prompt, check the
6. Select the
7. Select the desired client appliance or client group
from the list box in the center, then click
Remove
8. Click OK
Related Topics
"NFS Service" on page 62
n
Use this page to specify which FTP clients are granted
access to each share. Access can be granted or denied
on the basis of client host name.
To allow clients permission to an FTP share
1. On the primary menu bar, select
Shares.
DataSafe NAS User's Manual
drop-down list to
.
Object Selection table (Figure 51 on
list, click Properties...
tab (Figure 51 on page 118), enter
Share path
, and
Unix (NFS)
NFS
tab.
.
.

FTP Share Properties

Folders and
Windows
.
. Under the
box.
Folders and
122