Maintenance; Date And Time - Iomega DataSafe Network Device User Manual

7 Maintenance

From the main
the following general DataSafe NAS maintenance
tasks:
Set the date and time on the DataSafe NAS. (See
n
"Date and Time" on page 132.)
Shutdown or restart the DataSafe NAS. (See
n
"Shutdown Appliance" on page 133.)
Backup or restore the DataSafe NAS system
n
partition. (See "Back-up and Restore Tool" on
page 134.)
View and clear event logs. (See "Logs" on page
n
136.)
Manage all aspects of the DataSafe NAS by
n
connecting to the DataSafe NAS using the
Terminal Services Advanced Client. (See "Terminal
Services Client" on page 144.)
Set up and manage all aspects of email alert
n
notification. (See "E-mail Alerts" on page 148.)
This chapter also contains the section "Alerts" on
page 146, which covers DataSafe NAS Administration
UI alerts and LED alerts.

Date and Time

Using the Date and Time
the Date, Time, and Time Zone used by the DataSafe
NAS.
To set the date, time, and time zone of the
DataSafe NAS
1. On the primary menu bar, select
2. On the Maintenance page, click
DataSafe NAS User's Manual
Maintenance page, users can perform
property page, you can set
Maintenance .
Date and Time .
132