Nic Configuration - Iomega DataSafe Network Device User Manual

Figure 11 Administration Site Properties
3. On the General
Properties page:
a. Specify whether to use
Just this IP Address
b. If you choose to use Just this IP Address¸ use
the drop-down list to select the IP address to
use.
c. If changing the port, enter the new port num-
ber in the
4. Click OK

NIC Configuration

CAUTION:
DataSafe NAS User's Manual
tab of the Administration Site
All IP Addresses
.
Port text box.
.
The DataSafe NAS comes with default
NIC Configuration settings, designed
for optimum use. Iomega Corporation
highly recommends that these setting
not be changed.
or
43