Iomega DataSafe Network Device User Manual page 73

After a system failure, when the DataSafe NAS is
restarted the DataSafe NAS attempts to restore the file
lock status to the previous condition. If the client fails,
the DataSafe NAS releases the file lock. However,
after the client restarts it has a short period of time to
reclaim the file lock.
To manage NFS locks
1. On the primary menu bar, select
Object Selection
2. In the
Services
Properties
select
3. On the NFS Service
The NFS Locks
Figure 24 NFS Locks
NFS Locks
4. On the
locks
list box, select the client for which you want
to release the NFS locks.
Wait period
5. In the
seconds after restarting that the DataSafe NAS
waits to re-establish a file lock with a client.
6. Click OK
DataSafe NAS User's Manual
table of the
NFS Service
screen, select
Task
in the
page, click
page (Figure 24) displays.
page, from the
text box, enter the number of
.
Services .
Manage
, then
column.
Locks .
Current
68