Removing A Group Account; Modifying Group Properties - Iomega DataSafe Network Device User Manual

6. Click OK
Related Topics
"Initial DataSafe NAS Configuration" on page 13
n

Removing a Group Account

You can remove any group account that you have
created. A group account that has been removed,
however, cannot be re-created.
To remove a user account
1. From the primary menu bar, select
Groups.
Groups
2. Click
Object Selection
3. In the
account you wish to remove.
4. In the Tasks list, click
Delete Group
5. In the
identified is the group account you wish to delete,
then click
Related Topics
"Initial DataSafe NAS Configuration" on page 13
n

Modifying Group Properties

The Group Properties page displays the
and the Members
modify the group name and description. Use the
Members tab to add or remove users and groups.
To set or modify a group name or description
1. On the primary menu bar, select
Groups.
Groups.
2. Select
DataSafe NAS User's Manual
.
. (See Figure 40 on page 100.)
table, select the group
Delete .
dialog, verify that the group
OK
to delete the group account.
tab. Use the General
(See Figure 40 on page 100.)
Users and
General tab
tab to set or
Users and
102