Speed Limits; Driver Alerts - Becker TRAFFIC STAR NAVIGATION Operating Manual

>>> SETTINGS
After selecting
Advanced
whether all POI symbols or only a set of
> ZH
POI symbols selected by you are to be dis-
> EN
played on the map.

Speed limits

You can select whether speed limits are
displayed in parallel to the navigation.
You can also receive an audible warning
about exceeding the speed limit.
> Select
Speed limits
!Danger!
Risk of accident.
The speed limit information in the map
data may be incorrect as a result of
short-term changes (road works, for ex-
ample).
The traffic situation and the local road
signs take precedence over the naviga-
tion system information.
46
you can specify
> Switch the speed limits on
with
After selecting
whether speed limits are only to be dis-
in the map settings.
played if the limit is exceeded or always
displayed. You can also set the minimum
speed at which you would like to receive a
warning if the limit is exceeded.
or off
.
Speed limits
you can specify
Advanced

Driver alerts

You can have signs displayed, e.g. for dan-
gerous curves or steep gradients, provided
if this information is stored in the map da-
ta.
> Select
in the map settings.
Driver alerts
> Switch the warnings on
with .
Driver alerts
After selecting you can specify
Advanced
which categories of warnings should be
displayed.
or off