Starting The Content Manager - Becker Traffic Assist Z 102 Operating Instructions Manual

>>> GENERAL OPERATION

Starting the Content Manager

> D Execute the following actions to start the
Content Manager:
> GB
> Connect the USB interface of the
Traffic Assist directly to the USB port
> F
of the computer using the USB cable
> I provided.
> E
> P
> NL
> DK
> S
> Switch on the Traffic Assist using the
> N
button.
> FIN
Note:
> TR When you connect the Becker Traffic
Assist to the PC for the first time, the PC
> GR
installs all the necessary drivers and then
displays the message "Your unit is now
> PL
ready to use".
> CZ
After a short time, the Traffic Assist is
displayed as a removable storage medium
> H
on the computer.
> SK
28
> Click on
>
Start All Programs
computer.
> Select .
Becker
> Click on
Content Manager
When the Content Manager is started, the
program executes a number of steps before
you can start to manage your navigation
software content.
Each time the program is called, a
connection is established to the Internet
to check whether a new version of the
Content Manager is available. If a new
software version is found, the Content
Manager gives you the option of installing
it. We recommend that you always agree
to the upgrade, if one is available. If a new
software version is found, you have the
following options:
• Click on to accept the new software
Yes
version. The new version is downloaded
and installed before you can start the
Content Manager.
on the • Click on
No
Manager with the version already
installed.
.
• If the new version is a critical update,
the button will be shown instead of
Exit
the button. You must install the new
No
version, otherwise you have to exit the
application.
When you insert the DVD in the DVD
drive of your PC, the Content Manager
automatically reads and catalogues the
DVD content (provided it has not already
been added to the content list).
If you have not yet made a backup of the
navigation unit, the Content Manager
will ask you each time it starts whether
you would like to make a complete or
partial backup copy.
Note:
We recommend that you always create
the backup. Otherwise you will not be
able to restore the content in the event of
loss of data.
to start the Content