Lcd And Top Cover; Removing The Bottom Base Screws - NEC VERSA 6000 Series Service Manual

4-10 Field Service Guidelines

LCD and Top Cover

Remove the LCD and top cover as follows.
1. Power off the computer.
Remove the bottom base unit cover as follows.
2.
Turn the computer over with the VersaBay II slot facing towards you.
Locate the 10 screws that secure the bottom base unit cover. In all, there are 2
long-type screws, 2 medium-type screws, and 6 short-type screws.
Remove the ten screws.
Using a flat-head screwdriver, carefully detach the bottom base unit cover
from the top cover.
Figure 4-7 Removing the Bottom Base Screws