Front Cover And Versaglide Assembly - NEC Versa TXi Series Service Manual

Unplug the keyboard cable from connector P19 on the main board.
7.
8. Remove the keyboard from the notebook.

Front Cover and VersaGlide Assembly

Remove the front cover and VersaGlide assembly as follows.
Remove the primary battery and keyboard.
1.
2. Unplug the front cover and VersaGlide assembly cables from P20 (VersaGlide) and P26
(microphone) on the main board. Slide the VersaGlide cable out from under the support bar.
Pull up on the corners of the front cover and VersaGlide assembly to release it.
3.
Remove the front cover and VersaGlide assembly from the notebook.
4.
3-8 Disassembly and Reassembly
Removing the keyboard
A – Keyboard
B – Keyboard Cable
C – Connector P19
D – Front Cover and VersaGlide Assembly