Hdprepez Utility; Using Hdprepez In Windows 95 And Windows 98 - NEC SX Service And Reference Manual

4. Follow the on-screen instructions to process the selected option.
For some of the selected options you are prompted to reboot your system.
5. If necessary, click Exit to close the NEC Customize dialog box.

HDPREPEZ Utility

Using the HDPREPEZ utility automatically configures your NEC Versa's
system's save-to-file (STF) area on the hard disk drive.
Procedures for using HDPREPEZ for Windows 95, Windows 98, and Windows
NT systems differ. See the instructions appropriate for your system.
Note:
see the HDPREPEZ.TXT file in the NECUTILS/HDPREP
directory.

Using HDPREPEZ in Windows 95 and Windows 98

In Windows 95 and Windows 98, run the HDPREPEZ utility if you increase the
memory capacity in your NEC Versa beyond the factory installed base memory.
Follow these steps to run the HDPREPEZ utility.
1. Power off and restart your NEC Versa.
2. At the statement "Starting Windows 9x," press
3. From the Startup menu, select "Safe Mode Command Prompt Only."
4. Enter MS-DOS. At the c: prompt, type
change to the \necutils\hdprep directory.
5. Type
HDPREPEZ
NEC Versa for the newly installed memory.
6. Power off your system and then power on. A file, large enough to
accommodate your system's memory is created on the hard disk drive.
2-26 System Configuration and Setup
For more details about the HDPREPEZ utility,
and press . The utility automatically prepares your
Enter
.
F8
and press
cd \necutils\hdprep
to
Enter