Nec Customize Utility Screen; Using The Nec Customize Utility; Hdprepez Utility - NEC VERSA SXI Manual

NEC-supplied mouse driver (Windows NT only) — Use this option to take
!
advantage of the VersaGlide features described in Chapter 4, "Using the System
Drives and Bays."

NEC Customize Utility Screen

The NEC Customize utility screen consists of the following.
A window at the top half of the screen lists the available options.
!
The window below the options list displays a description of each option when the
!
option is highlighted.
The Launch button initiates a selected option when clicked.
!
The More Info button provides an overview of the NEC Customize utility.
!
The Exit button closes the NEC Customize utility.
!

Using the NEC Customize Utility

Follow these steps to use the NEC Customize Utility.
Double click the NEC Customize icon.
1.
2. From the display window, select the desired option.
Click Launch to initiate the selected option.
3.
Follow the on-screen instructions to process the selected option.
4.
For some of the selected options you are prompted to reboot your system.
If necessary, click Exit to close the NEC Customize dialog box.
5.

HDPREPEZ Utility

The power management state referred to as Save-To-File (STF) saves the system's
current working environment to the system's hard drive, then powers down the system
to conserve battery power. The HDPREPEZ function creates a file large enough (512
MB) to accommodate the entire memory contents of your system. The STF file is
created the first time that you run your system's setup program.
Note
the NECUTILS/HDPREP directory.
For more details about the HDPREPEZ utility, see the HDPREPEZ.TXT file in
Using the Operating System and Utilities 4-7